Перейти к основному содержанию

Changes to Step #10

Edit by Kate Atkins

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the following 5 screws/standoffs:
[* red] Four black T6 Torx screws securing the left I/O board to the lower case.
[* orange] One 4 mm standoff located between the audio jacks. (The easiest way to remove it is to stick a Torx T6 screwdriver in the hole and turn it.)
[* orange] One 4 mm standoff located between the audio jacks. (The easiest way to remove it is to stick a Torx T6 screwdriver in the hole and turn it.)