Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью John -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Get your soldering tools ready. You need a soldering iron and solder.
[* black] You also need some insulation. You can use either heat shrink tubing or electrical tape.
[* black] In this guide we used heat shrink for one wire and electrical tape for the other, to show how you would use each one.
[* black] Splice the wires together by wrapping them around each otherother.
[* black] Splice the wires together by wrapping them around each otherother.
[* icon_note] Remember to put the heat shrink on the wire before you splice it to the other side.