Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Lisa Choe -

Правка одобрена автор Lisa Choe

До
После
Без изменений

Шаг Линий

-[* red] Remove 6 Phillips #000 4.4 mm screws that secure the metal cover.
-[* orange] Remove 2 Phillips #000 2.5 mm screws that secure the back panel.
-[* black] After all 8 Phillips #000 screws are removed, pull the metal plate out with your fingers.
+[* red] Remove 6-4.4 mm screws that secure the metal cover using a Phillips #000 screwdriver.
+[* orange] Remove 2-2.5 mm screws that secure the back panel using a Phillips #000 screwdriver.
+[* black] After all 8 screws are removed, pull the metal plate out with your fingers.