История MacBook Pro 13" Unibody Early 2011 Hard Drive Cable Replacement Шага #6

Возврат к шагу #6

Отредактированно omya - 29 мар 2017 г.

Правка одобрена автор Evan Noronha

	[* icon_note] Your replacement part may or may not come with the front (sensor) bracket. If it does not, you'll need to transfer it to your new cable.
-	[* black] Use the tip of a spudger to flip the ZIF connector on the hard drive cable.
-	[* black] Gently pull the sensor bracket cable out of the ZIF connector.
-	[* black] Use the flat end of a spudger to pry the hard drive cable up off the sensor bracket.
+	[* black] Use the tip of a spudger to flip the "lever" of the ZIF connector (left side in first photo) on the hard drive cable. The connector does not come off, see next instruction.
+	[* black] Gently pull the yellow sensor bracket cable out of the ZIF connector (to the right, in the second photo).
+	[* black] Use the flat end of a spudger to pry the hard drive cable up off the sensor bracket to which it is adhered.
	[* icon_reminder] Remove the adhesive backing from your new hard drive cable, stick it onto the sensor bracket, and connect the sensor bracket cable.
+	[* icon_caution] Many fixers cover the length of the thicker cable in the pair with sections of electrical tape on both sides because it can rub the tiny ridges inside the aluminum case causing a short to the case itself or simply breaking the connection.