Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

-[* black] Remove the following screws:
- [* red] Three 1.3 mm Phillips screws
- [* orange] One 1.6 mm Phillips screw
- [* yellow] One 3.0 mm Phillips screw
- [* icon_caution] It's very important that the one 3.0 mm screw goes in the top-right corner of the bracket. Anywhere else may cause damage to the logic board.
+[* black] Remove the following Phillips screws:
+ [* red] Three 1.3 mm screws
+ [* orange] One 1.6 mm screw
+ [* yellow] One 3.0 mm screw
+ [* icon_reminder] It's important that this 3.0 mm screw goes in the top-right corner of the bracket. Anywhere else may cause damage to the logic board.