Перейти к основному содержанию

Возврат к шагу #4

Отредактированно mbarthet3 -

Правка отклонена автор Scott Havard

До
После
Без изменений

Шаг Линий

[* black] Use a plastic opening tool to disconnect the digitizer cable by prying it straight up from its socket on the logic board.
-[* icon_reminder] When reconnecting the digitizer cable, ***do not press the center of the connector***. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.
+[* icon_caution] When reconnecting the digitizer cable, ***do not press the center of the connector***. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.