Возврат к шагу #4
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
- | [* black] Use a plastic opening tool to disconnect the display data cable connector. |
---|---|
+ | [* black] Use a plastic opening tool to disconnect the digitizer cable by prying it straight up from its socket on the logic board. |
+ | [* icon_reminder] When reconnecting the digitizer cable, ***do not press the center of the connector***. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage. |