Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #3

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[* red] The safest place to pry from is the notch in the front panel above the headphone jack.
[* icon_caution
icon_caution] Be very careful when pulling. Pulling too hard may damage the display assembly. Pull just enough to create a small gap between the display assembly and the rear case.
[* red] The safest place to pry from is the notch in the front panel above the headphone jack.
[* icon_caution
icon_caution] Be very careful when pulling. Pulling too hard may damage the display assembly. Pull just enough to create a small gap between the display assembly and the rear case.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Удален