Возврат к шагу #3
Отредактированно Evan Noronha -
Правка одобрена автор Evan Noronha
- До
- После
- Без изменений
Шаг Линий
| [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| - | [* icon_caution] Be careful when pulling. Pulling too hard may damage the display assembly. |
| + | [* icon_caution] Be careful when pulling. Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case. |