Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Use your fingernail to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
[* black] Use the tip of a spudger to pull the keyboard ribbon cable out of its socket.
-[* icon_note] The ribbon cable is difficult to insert again. Use a piece of electricians tape stuck to the ribbon (see comments)
+[* icon_reminder] The cable may be difficult to insert. If you are having trouble, temporarily attach a piece of tape to the cable to help you guide the cable into the socket.