Перейти к основному содержанию

Возврат к шагу #5

Отредактированно iRobot -

Правка одобрена автор iRobot

До
После
Без изменений

Шаг Линий

[* red] Flip up the beige clip to loosen the cable.
-[* black] Use the wide nosed tweezers to pinch the blue tab attached to the ribbon cable.
+[* black] Use the wide nosed [product|IF145-020|tweezers] to pinch the blue tab attached to the ribbon cable.
[* black] Pull the blue tab gently in a lateral motion until it is completely out of its port.