Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Johnny Stephens -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[title] Front Panel
-[* black] You will not want to try to pry it up, just insert the pick down to loosen the clips.
-[* black] Be extra careful not to damage the screen as it is fragile.
-[* black] Work your way around the device being careful around the MicroSD, sim card and power volume buttons
-[* black] After working your way around the device, attempt to lift it out of the plastic frame. You may need to loosen some more clips if it is difficult to remove.
-[* black] Lift the device out of the chassis from the bottom where the microUSB port is after the clips are adequately loosened.
+[* black] The screen assembly is secured to the plastic backing with clips. Insert the spudger between the screen and plastic.
+[* black] Work your way around the device, freeing it from the connecting clips.
+[* black] Take care when near the MicroSD, sim card, power, and volume buttons
+[* black] Attempt to lift it out of the plastic frame. You may need to loosen some more clips if it is difficult to remove.
+[* black] Lift the device out of the chassis from the bottom, near the microUSB port.