Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Dan -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
-[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector.
+[* black] Disconnect the three antenna cables from the Airport card.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.