Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Toni -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 2 screws from the right hinge mount:
[* red] One 6 mm Phillips on the left side of the hinge mount.
[* orange] One 10 mm Phillips on the right side of the hinge mount.
[* black] For Santa Rosa/Penryn models, see second picture and remove:
- [* red] One 6 mm smalller diameter Phillips on the far left.
+ [* red] One 4 mm smalller diameter Phillips on the far left.
[* orange] One 6 mm larger diameter Phillips in the middle.
[* yellow] One 10 mm Phillips from the far right.
[* black] Lift the right hinge mount out of the computer.