Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereUse the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
[* black] Pull the connector away from its socket on the logic board.
[* icon_caution] Do not lift the cable upward as you disconnect it
.
[* black] Insert wisdom hereUse the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
[* black] Pull the connector away from its socket on the logic board.
[* icon_caution] Do not lift the cable upward as you disconnect it
.