Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Use the flat end of a plastic opening tool to flip up the ZIF lock tab on the headphone jack and front-facing camera ribbon cable.
+[* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to loosen the adhesive attaching the cable to the rear panel.
+[* black] Grasp the headphone jack and front-facing camera ribbon cable and pull it straight out of its socket on the logic board.