Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Use the flat end of a plastic opening tool to flip up the ZIF lock tab on the headphone jack and front-facing camera ribbon cable.
-[* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to loosen the adhesive attaching the cable to the rear panel.
-[* black] Grasp the headphone jack and front-facing camera ribbon cable and pull it straight out of its socket on the logic board.
+[* black] Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
+[* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.
+[* black] Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.