Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

-[* black] Pull up on the front panel using the suction cup.
+[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
+[* icon_caution] Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.