Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Adam Olzick -

Правка одобрена автор Adam Olzick

До
После
Без изменений

Шаг Линий

[* black] Use the point of a spudger to flip up the locking mechanism on the I/O board connector.
[* black] Flip the spudger around and use the flat end to slide the I/O cable out of the connector.
+[* icon_note] Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.