Skip to main content

Changes to Step #18

Edit by Scott Havard

Правка одобрена by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* black] Use a spudger to slide uplift the connectorretaining flap holding the orange battery ribbon in place. Youconnector cable.
[* icon_caution] The retaining flap
only needneeds to lift the locking bar up about 2 mm to freemm. This is a sensitive connector and too much force can remove it from the cablelogic board.
[* black] Use a spudger to slide uplift the connectorretaining flap holding the orange battery ribbon in place. Youconnector cable.
[* icon_caution] The retaining flap
only needneeds to lift the locking bar up about 2 mm to freemm. This is a sensitive connector and too much force can remove it from the cablelogic board.
[* black] Slide the orange battery ribbon out of its connector.