Перейти к основному содержанию

Changes to Step #22

Edit by Mart

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.
[* black] Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.
[* icon_caution] Be careful not to damage any of the headphone jack parts while shaping these clips!