Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Jack Bowen -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] There is a small toggle switch inInsert your spudger along the slot where the stylus is normally stored. Removeslit between the styluskeyboard and then flip the switch.
[* black]
external casing. Pry along the edges of the rear casingopen as shown.
[* black] There is a small toggle switch inInsert your spudger along the slot where the stylus is normally stored. Removeslit between the styluskeyboard and then flip the switch.
[* black]
external casing. Pry along the edges of the rear casingopen as shown.
[* icon_caution] Careful! The ribbon connecting the keyboard to the motherboard will still connect the two halves of the phone when you separate them. Be sure to take your time and move slowly to avoid damage to the cable.

Изображение 1

Старая версия

Новая версия