Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Jason Owen -

Правка отклонена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* icon_caution] Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.
[* black] Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.
[* icon_caution] To avoid tearing the adhesive strip, be careful not to snag it against the battery or lower components.
[* black] Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
[* icon_note] The strip runs the entire length of the battery and will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.
[* icon_note] The strip runs the entire length of the battery and will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.