Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone.
[* icon_caution] To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components.
[* black] Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.
[* icon_note] The strips will stretch to many times their original length. Continue pulling and re-grab the strips near the battery if necessary.
[* icon_caution] Hold down the battery with one hand as you pull, or the elastic strips may fling the battery from the phone once they're separated from the rear case.
[* black] Continue pulling until both adhesive strips come free from the iPhone.