Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Luis Arangu -

Правка одобрена автор Luis Arangu

До
После
Без изменений

Шаг Линий

[* black] Pry opendTry open edges around rear cover (do not completely remove cover). Warm rear side of phone with applied heat source, this will allow adhesives on the cover to soften. Once adhesives are soft enough, peal cover apart from phone.
[* black] Pry opendTry open edges around rear cover (do not completely remove cover). Warm rear side of phone with applied heat source, this will allow adhesives on the cover to soften. Once adhesives are soft enough, peal cover apart from phone.