Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Dieter -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

-[* red] Remove the two Phillips #00 screws securing the on/off switch to the front bezel.
+[* red] Remove the two 1.6mm Phillips #00 screws securing the on/off switch to the front bezel.
[* icon_note] When replacing, check the protrusion of the switch. There is a small plastic spacer adhered to the inside of button which may come off with cleaning. Without a spacer, the button may not protrude enough to be depressed. If lost, it can be replaced with a suitable thickness of stiff plastic (eg shirt box lid).