Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью faorazem -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 4 screws:
- [* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel.
+ [* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter.
[* orange] One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.