Перейти к основному содержанию

Возврат к шагу #10

Редактировать с помощью Jeff Stephens -

На одобрении

До
После
Без изменений

Шаг Линий

[title] Removing the logic board shield cover
-[* icon_caution] Removing this shield may not be necessary and doing so risks damaging the small components mounted on the logic board. If you decide to remove the shield proceed cautiously and use a plastic tool such as a [product|IF145-002|spudger]. You may need to whittle a sharper edge on the tool.
+[* icon_caution] Depending on the nature of the liquid damage removing this shield may not be necessary and doing so risks damaging the small components mounted on the logic board. If you decide to remove the shield proceed cautiously and use a plastic tool such as a [product|IF145-002|spudger] or [product|IF145-000|plastic opening tool]. To get leverage under the edge of these tiny tabs you may have to whittle a sharper edge the flat end of your tool.
[* violet] Look for the dimpled tabs on the shield that reach down over the tabs attached to the mother board.
[* black] Using your plastic tool, catch the edge of a dimpled tab near a corner of the shield and pry it up away from the logic board.
+[* black] Being careful of all the tiny surface mounted components work your way around the available edges until the shield comes free