Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Jeff Stephens -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Soak motherboard in isopropyl alcohol. You can allow the board to soak in this to loosen hardened residue before you use the soft brush to remove corrosion and residue.
-[* black] Residue from motherboard left in isopropyl alcohol container.
-[* black] Clean all flex ends, battery contacts, connectors, chips and fuses on motherboard with soft brush.
-[* black] Allow to dry and repeat if necessary or trace is still visible.
-[* black] Allow iphone to dry then reassemble and check iphone functions. you can now diagnose any part or parts that aren't working.
+[title] Cleaning the logic board
+[* black] Submerge the logic board in isopropyl alcohol and allow it to soak long enough to loosen hardened residue. Then use a soft brush to remove corrosion and residue.
+[* violet] Residue from motherboard left in isopropyl alcohol container.
+[* black] Clean all flex ends, battery contacts, connectors, chips and fuses on motherboard with a soft brush.
+[* black] Repeat cleaning if necessary or if traces of residue are still visible.
+[* black] Allow the logic board or other parts to dry completely before reassembly.

Изображение 2

Старая версия

Новая версия