Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Jeff Stephens -

На одобрении

До
После
Без изменений

Шаг Линий

[title] Cleaning the logic board
-[* black] Submerge the logic board in isopropyl alcohol and allow it to soak long enough to loosen hardened residue. Then use a soft brush to remove corrosion and residue.
+[* black] Submerge the logic board in isopropyl alcohol and allow it to soak long enough to loosen hardened residue and to displace any remaining water or other liquid. Then use a soft brush to remove visible corrosion and residue.
[* violet] Residue from motherboard left in isopropyl alcohol container.
[* black] Clean all flex ends, battery contacts, connectors, chips and fuses on motherboard with a soft brush.
[* black] Repeat cleaning if necessary or if traces of residue are still visible.
[* black] Allow the logic board or other parts to dry completely before reassembly.