Перейти к основному содержанию

Изменения к шагу №5

Отредактированно Richdave -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_caution] Using a plastic spudger or pry tool, work '''GENTLY''' around the edges of the LCD to loosen it from the gasket below - use '''GREAT CARE''' so you don't crack or chip the panel as it is only a couple mm thick
[* icon_caution] Using a plastic spudger or pry tool, work '''GENTLY''' around the edges of the LCD to loosen it from the gasket below - use '''GREAT CARE''' so you don't crack or chip the panel as it is only a couple mm thick
[* black] Once the LCD is loose you need to HOLD it in place in the black plastic frame and '''GENTLY''' flip the entire assembly so the LCD is flat on the work surface