Перейти к основному содержанию

Изменения к шагу №8

Отредактированно Richdave -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] blankGently flip the PCB over 180deg so it is off the aluminum back panel.
[* icon_caution] Be '''CAREFUL''' not to damage the 8 flex cables
[* icon_note] The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to '''GENTLY''' lift the PCB up
[* black] blankGently flip the PCB over 180deg so it is off the aluminum back panel.
[* icon_caution] Be '''CAREFUL''' not to damage the 8 flex cables
[* icon_note] The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to '''GENTLY''' lift the PCB up

Изображение 1

Нет предыдущего изображения

Добавлено