Перейти к основному содержанию

Возврат к шагу #15

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Carefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal.
+[* black] If necessary, use the flat end of a spudger to separate the microphone from the upper case.
+[* black] Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.