Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью John Cobb -

Правка одобрена автор John Cobb

До
После
Без изменений

Шаг Линий

[* black] Start by unscrewing theremoving the housing capcap by unscrewing it.
[* red] ThenNext, unscrew the now exposed collet nut while holding down the shaft lock button. The arrow shows the location of the shaft lock button.
[* black] Start by unscrewing theremoving the housing capcap by unscrewing it.
[* red] ThenNext, unscrew the now exposed collet nut while holding down the shaft lock button. The arrow shows the location of the shaft lock button.
[* black] Remove the metal hangar by pulling prongs out from the casing.