Возврат к шагу #1
Редактировать с помощью Patty Remmell -
Правка одобрена автор Patty Remmell
- До
- После
- Без изменений
Шаг Линий
| [* black] Start by removing the housing cap by unscrewing it. |
| [* red] Next, unscrew the now exposed collet nut while holding down the shaft lock button. The arrow shows the location of the shaft lock button. |
| [* icon_note] To remove the collet nut, you may need to use the small open-end wrench provided with the Dremel. |
| [* black] Remove the metal |
| [* black] Remove the metal |