Почините Свои Вещи Сообщество Магазин

Возврат к шагу #4

Отредактированно mikeharms -

Правка отклонена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use the flat end of a spudger to pry all three AirPort antenna connectors up from their sockets on the AirPort board.
-[* icon_reminder] During reinstallation, connect the cable with no stripes to the socket marked CH0, the cable with one stripe to CH1, and the cable with two stripes to CH2.
+[* icon_reminder] The cables have either no stripes, one stripe or two stripes. Write down which striped cable goes to which socket. During reinstallation, reconnect the cables to the same original channels.