Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Andrew Bookholt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the following four screws securing the power supply to the outer case:
[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.
[* black] Remove the following four screws securing the power supply to the outer case:
[* red] One 9.3 mm T10 coarse-threaded screw
[* orange] One 25 mm T10 coarse-threaded screw
[* yellow] Two 22 mm fine-threaded screws

Изображение 1

Старая версия

Новая версия

Изображение 2

Удален