Перейти к основному содержанию

Изменения в этом шаге

Отредактированно Richard Suovanen -

Правка одобрена автор Richard Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Placeblack] Remove the plastic opening tool underneath the ribbon cable attaching the front-facing camera to the motherboard. Gently lift the ribbon cable upwards releasing the front-facing camera's ribbon cable from the motherboard.
[* blue] Place
following four press-fit connectors with the flat edge of a plastic opening tool underneath the ribbon cable attaching the rear-facingspudger:
[* red] Front-facing
camera to the motherboard. Gently lift the ribbon cable upwards releasing the rear-facing camera's ribbon cable from the motherboard.
[* violet] Place the plastic opening tool underneath the ribbon cable attaching the battery to the motherboard. Gently lift the ribbon cable upwards releasing the battery's ribbon cable from the motherboard.
[*
connector.
[* orange] Rear-facing camera connector.
[* yellow] Battery connector.
[*
green] Place the plastic opening tool underneath the ribbon cable attaching the display to the motherboard. Gently lift the ribbon cable upwards releasing the display's ribbon cable from the motherboardDigitizer connector.
[* red] Placeblack] Remove the plastic opening tool underneath the ribbon cable attaching the front-facing camera to the motherboard. Gently lift the ribbon cable upwards releasing the front-facing camera's ribbon cable from the motherboard.
[* blue] Place
following four press-fit connectors with the flat edge of a plastic opening tool underneath the ribbon cable attaching the rear-facingspudger:
[* red] Front-facing
camera to the motherboard. Gently lift the ribbon cable upwards releasing the rear-facing camera's ribbon cable from the motherboard.
[* violet] Place the plastic opening tool underneath the ribbon cable attaching the battery to the motherboard. Gently lift the ribbon cable upwards releasing the battery's ribbon cable from the motherboard.
[*
connector.
[* orange] Rear-facing camera connector.
[* yellow] Battery connector.
[*
green] Place the plastic opening tool underneath the ribbon cable attaching the display to the motherboard. Gently lift the ribbon cable upwards releasing the display's ribbon cable from the motherboardDigitizer connector.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия