Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Lisa -

Правка отклонена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] UseIf you have the new trackpad with a cable fitted, use the flat end of a spudger to carefully pry the trackpadits connector up from itsthe socket on the logic board. Otherwise, it is better to disconnect the cable from the trackpad. To do it, lift the tiny lever on the outer side of the connector. Do not hurry to take it out, it is glued to the trackpad.
[* black] UseIf you have the new trackpad with a cable fitted, use the flat end of a spudger to carefully pry the trackpadits connector up from itsthe socket on the logic board. Otherwise, it is better to disconnect the cable from the trackpad. To do it, lift the tiny lever on the outer side of the connector. Do not hurry to take it out, it is glued to the trackpad.