Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Lisa -

Правка отклонена автор Jeff Suovanen

Без изменений

Шаг Линий

[* red] Next, reinstall the four 1.2 mm Phillips screws along the inner edge of the trackpad.
[* icon_note] Tighten the screws all the way, then back them out about 1/4 turn.
[* black] Check the alignment of the trackpad on the keyboard side of the upper case. Once you have centered the trackpad in the upper case, tighten the four Phillips screws all the way.
[* black] If you have your new trackpad without a cable, and had disconnected the original one from the trackpad side, now put it back. Open the tiny lever on the new trackpad and slide the cable in, until the dashed line gets all the way in. Close the lever.