Перейти к основному содержанию

Изменения в этом шаге

Edit by thetatek

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] I use a razor knife and a small screw driver instead of this tool. You have to user the razor to just start the separation on the side opposite the volume control. When razor has made the gap large enough on the one side to put the tip of the screw driver insert the screw driver. The screw driver is only used to keep the gap open so you can use the razor to continue the separation towards the volume control side. Don't use the razor to cut with. Once you have started the separation using the sharp side of the razor knife use the back side to continue the separation.

Image 1

Нет предыдущего изображения

Добавлено