Перейти к основному содержанию

Changes to Step #6

Edit by Tim

Правка отклонена автор Adam O'Camb

Удален
Добавлено
Без изменений

Шаг Линий

[title] Removing the battery connector bracket screws
[* black] Remove the following Phillips screws from the battery connector bracket:
[* red] One 2.2 mm screw
[* orange] One 3.2 mm screw
[* icon_caution] Make sure you don't mix up the screws. It's essential to ensure that all screws are returned to their respective holes to avoid permanent damage to the logic board.