Перейти к основному содержанию

Changes to Step #14

Edit by Slot1gamer

Правка отклонена автор Sam Goldheart

Без изменений

Шаг Линий

[* black] Use the flat end of a spudger to disconnect the digitizer cable connector.
[* icon_reminder] When reconnecting the digitizer cable, '''do not press the center of the connector'''. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.
[* black] Be careful not to damage the small components on the logic board around the connector. These are vital to correct function of the phone.
[* black] If you are having trouble lifting the connector up, start on the left hand side (closest to the battery).