Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Lev Tsenovoy -

Правка отклонена автор Evan Noronha

До
После
Без изменений

Шаг Линий

-[* black] Remove the following three screws securing the fan to the upper case:
+[* black] Remove the following three screws securing the fan to the upper case: Note: keep track of which screw goes where. You can demmage the logic board if you use the 5.2mm screw in the 3.6mm location.
[* red] Two 5.2 mm T5 Torx screws
[* orange] One 3.6 mm T5 Torx screw