Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Use the flat end of a spudger to lift the I/O board connector up and out of its socket on the logic board.
+[* icon_caution] Be sure to lift straight up on the connector as you disconnect it from its socket. The socket is very deep on the logic board and prying it from side to side may damage the logic board.
+[* black] Remove the I/O board cable.