Перейти к основному содержанию

Изменения к шагу №2

Отредактированно robertcbaruch -

На одобрении

Без изменений

Шаг Линий

[* black] Take two screwdrivers, and unscrew, simultaneously, the screw heads indicated, on either side of the carriage.
[* black] The left screw head is attached to a screw, while the right one is just a head attached to a shaft.
[* red] 4-48 machine screw, 1/4"
[* red] Carriage shaft, 0.249" diameter
[* black] Use an awl to poke the shaft from the left side so that it comes out the right side. Pull the shaft out completely.