Перейти к основному содержанию

Изменения к шагу №2

Отредактированно robertcbaruch -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] The carriage has a row of 8 digits above, which is the counter, and a row of 16 digits below, which is the accumulator. Let's remove it.
[*
black] Take two screwdrivers, and unscrew, simultaneously, the screw heads indicated,indicated on either side of the carriage.
[* black] The carriage has a row of 8 digits above, which is the counter, and a row of 16 digits below, which is the accumulator. Let's remove it.
[*
black] Take two screwdrivers, and unscrew, simultaneously, the screw heads indicated,indicated on either side of the carriage.
[* black] The left screw head is attached to a screw, while the right one is just a head attached to a shaft.
[* red] 4-48 machine screw, 1/4"
[* red] Carriage shaft, 0.249" diameter
[* black] Use an awl to poke the shaft from the left side so that it comes out the right side. Pull the shaft out completely.
[* black] Pull back the carriage hook arms and lift the carriage off.