Перейти к основному содержанию

Изменения к шагу №6

Отредактированно robertcbaruch -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] The shafts are held by [http://en.wikipedia.org/wiki/Bushing_(bearing)#Bushing|bushings] which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place.
[* red] Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.
[* red] 5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-201/4-28, length 1/8"
[* red] 5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-201/4-28, length 1/8"