Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #6

Редактировать с помощью robertcbaruch -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] The shafts are held by [http://en.wikipedia.org/wiki/Bushing_(bearing)#Bushing|bushings] which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place.
[* red] Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.
[* red] 5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-281/4-32, length 1/8"
[* red] 5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-281/4-32, length 1/8"