Перейти к основному содержанию

Изменения к шагу №7

Отредактированно robertcbaruch -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Remove the cam lock arm springspring from the left side of the carriage.
[* red] Remove the cam lock arm springspring from the left side of the carriage.
[* red] Extension spring, OD 0.123", WD 0.014", compressed length 0.34"
[* black] This spring pulls the arms against cams fixed to the digit shafts so that the digit shafts will not rotate when the zero-setting mechanism is not operating. It is important that the digit shafts themselves not rotate, since each digit wheel needs to be able to rotate freely on the shaft.

Изображение 1

Старая версия

Новая версия